| |
|
 |
 |
| |
| |
|
Home > Ball Valves > Plastic Ball Valves 2Way & 3Way > 2533K |
| |
|
3-Way Ball Valves In Plastic Body with 90° Electric Actuator
|
DATA SHEET
2533 KXX1/PVC
2533 KXX2/PVC
2533 KXX5/PVC |
|
| |
|
| |
SPECIFICATIONS : |
Type 2533K Series are Full Bore, PVC Construction Ball Valves, fitted with 90° turn Electric Rotary Actuator. Valves can be used for Water, Air, Oil, Corrosive Chemicals, Dirty fluids.The ball Valves When in 'Closed ' position isolates completely fluid flowing through valve. 'open' assures very high rate of flow.
Bodies are available with both ends union connection, which further can be provided with:
2533KXX1- Optional- Screwed end to'F' (BSP),
2533KXX2-Standard-Solvent Cement Stocket Metric,
2533KXX5- Optional- Flanged, toANSI CI.150or DIN PIN 16.
Max.flu : See Pressure Temp Chart. |
| ACTUATOR : |
| AVACON Model EA-21/EA-50 Geared Actuator, Motorized to Open to Motorized to close, has 2 nos. Limit Switches, to disconnect electric supply at each end of travel. Also can be set to change various degree of opening of value, to suit individual requirement. The Actuator can be further fitted up to with additional 2 nos. Limit switches and feedback potentiometer. |
| Type : EA-21/EA-50 |
Motorized to Open to Motorized to close. |
| Max. temperature |
60°. |
| Electric Voltage Supplay |
230V 50Hz a.c. supplay (±10%). |
| Manual Override |
Manual override is standard to open or close the valve, in case of power faliure. For other details of actuator please refer to leaflet EA-21/EA-50. |
|
 |
| OPTIONAL FEATURES & ACCESSORIES : |
| Actuator can be fitted with one or two resettable auxilliary limit switches. Additional one or two potentiometers, interfacing units to accept o to 0 to 5 Volts or 2 to 10 Volts (4 to 20 mA). |
| Note |
While asking for offer- please specify name of line fluid, pressure temperature ,flow in M³/hr, end connections details, supply voltage, hertz and any opotional features and accessories required. |
|
|
| |
| SPECIFICATION TABLE |
Catalogue
Number |
Size Dia |
Pipe Size
|
Safe body
Pressure |
Working
Pressure |
Actuator
model |
KV |
Max.Wkg
Temp |
Wt# |
| Bore Size |
Pipe OD |
| mm |
mm |
mm |
bar |
bar* |
No |
M³/hr |
C |
Kgs |
| 2533 K 152 |
15 |
15 |
20 |
10 |
8 |
EA-21/D |
10.0 |
60 |
2.7 |
| 2533 K 202 |
20 |
20 |
25 |
10 |
8 |
EA-21/D |
28.0 |
60 |
3.1 |
| 2533 K 252 |
25 |
25 |
32 |
10 |
8 |
EA-21/D |
40.0 |
60 |
3.3 |
| 2533 K 302 |
32 |
32 |
40 |
10 |
8 |
EA-21/D |
71.0 |
60 |
4.3 |
| 2533 K 402 |
40 |
40 |
50 |
10 |
8 |
EA-21/D |
103.0 |
60 |
5.2 |
| 2533 K 502 |
50 |
50 |
60 |
8 |
8 |
EA-50/D |
234.0 |
60 |
8.0 |
|
| |
|
|
|
|
* Working pressure limit is assumed that, flued temperature to be at 30°C or bellow.
# Weight given above is Ball Valves with Electric Actuator with Solvent Cement Socket End Connection and without any accessory for other models Weight may differ. Other body matarial available in PVDF & PP. |
| |
| To find out size of valve Bora dia : |
Approx calculation of valve I.D.(for Liquid) Formula for calculating of values bore dia.
 |
|
a= Bore dia of the value (mm)
v= Velocity of the flow/flow ratein u/s for water
= (0.5 to 1.00 m/s for sucton side)
= (1.0 to 3.0 m/s for pressure side)
Q1 = Flow rate in M³/hr
Q2 = Flow rate in L/s |
|
|
|
| 3 WAY PVC BALL VALUE WITH ELECTRIC ACTUATOR EA-21/50 |
|
| BOTTOM VIEW WITHOUT ACTUATOR |
| |
| DIMENSIONS (IN MM) |
Catalogue
Number |
Pipe
Size
(Inch) |
A |
B |
C |
D |
E |
F |
Weight (Kg) |
| 233 K 151 |
1/2 |
140 |
34 |
236 |
172 |
105 |
104 |
2.4 |
| 233 K 201 |
3/4 |
190 |
43 |
248 |
172 |
105 |
136 |
2.8 |
| 233 K 251 |
1 |
173 |
43 |
248 |
172 |
105 |
126 |
2.5 |
| 233 K 351 |
1 1/2 |
238 |
57 |
263 |
172 |
105 |
172 |
4.2 |
| 233 K 501 |
2 |
270 |
65 |
295 |
200 |
128 |
198 |
7.5 |
• OPEN TOLERANCE ± 3 mm ALL OVER |
PRESSURE TEMPERATURE CHART
 |
|
| |
| Note: |
Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON. |
|
|
|
|
|
|
|
