AvconIndia

Home > Control Valves > Motorised Control Valves > 5516A-CSF

2/3-Way Motorised Control Valves with Electric Actuator
For Thermic Fluid Application-Mixing or Diverting Type (On-Off and Control Application)

DATA SHEET
MV-5516A/WCBF

SPECIFICATIONS :
Sizes	20mm (3/4”) to 150mm (6”).
Unified Flanges	As per ANSI CI. 150 and PN 16.
Pressure Rating	As per ANSI CI. 150,CI. 300, PN 16 & PN 25.
Pressure Temp. rating	As per ASTM-A-16.34.
Gland Packing	Carbon filled Teflon for temp. upto 420°C with Cooling Finned Bonnet.
Design Standard	ASME B16.34.
Leakage	As per ASME 16.104 CI.IV (0.01% of Kv).
Face to Face	As per DIN-3202. Part I Series F1. (All materials)
Testing Standard	As per ISA S 7501.
Type of Plug	On-Off or Linear.
Seat	Screwed type replaceable.
Body & Bonnet Material	CS-ASTM A 216 WCB (DIN 1.0619 GS-C 25). SG Iron-ASTM A536,Gr.60-40-18 (DIN 0.7043) (GGG40.3). SS-ASTM A351CF8M (DIN1.4408) (GX6 Cr.Ni MO 1810) SS-ASTM A351 CF8 (DIN1.4301)
Plug Material	SS AISI 420/316.
Seat Ring	SS AISI 420/316.
Spindle	410/316 Ground, Burnished & Hard Chromed.
Studs	ASTM A193 Gr. B7.
Hex. Nuts	ASTM A194 Gr. 2H.
Body Packing	Cr.Ni Foil coated with graphite.
Rangeability	Linear 50:1.
Fluid	Hot Thermic Fluid, Hot Water, Hot Steam, etc.
Note	5516A are Metal Seated Valves.

ACTUATOR :
Electric Actuator	Series KN.
Housing	Aluminium Silicon alloy heat treated.
Gears	Steel hobbed, toughened gears.
Electric Motor	Single phase, permanent split phase capacitor type class ‘F’ insulated motor.
Electric Supply	220/240,110,24 Volts 50/60 Hz, AC.
Switching cycles	Upto 240 cys per hour for small size valves and for large size valves refer to AVCON. (Switching cycles is meant for duration of less than 0.1 second).
Actuator Yoke	Steel rods with position indicator assembly or Cast Carbon Steel casting.
Stem Tension	Through belleville packed spring.
Valve Position on Failure of Electricity.	Stayput
Control Suitability	Actuator is suitable for On-Off, Anticipatory, PI, PID Control system.
For further details of Actuator refer to Actuator leaflet KN’ series.

SPECIFICATION TABLE

Catalogue Number	Size	Orifice Size	Flow Factor Kv	Safe Working Pressure	Actuator				Stroke (Approx.)	Travel time (Approx.)
	Size	Orifice Size	Flow Factor Kv	Safe Working Pressure	KN-02	KN-05	KN-10	KN-25	Stroke (Approx.)	Travel time (Approx.)
	(mm)	(mm)	M³/hr.	Bar	Working Pressure (Bar)				mm	Secs.
5516A205/WCBF x KN 02/05	20	22	6.3	40	15	40	-	-	20	49
5516A255/WCBF x KN 02/05	25	25	10	40	12	35	-	-	20	48
5516A405/WCBF x KN 02/05	40	40	25	40	10	20	-	-	20/30	48
5516A505/WCBF x KN 05/10	50	50	40	40	-	15	40	-	30	80
5516A655/WCBF x KN 05/10	65	65	63	40	-	7	30	-	30	80
5516A805/WCBF x KN 10	80	80	100	40	-	-	20	-	30	60
5516A1005/WCBF x KN 10/25	100	100	160	40	-	-	12	20	30	60
5516A1505/WCBF x KN 10/25	150	150	320	40	-	-	5	10	50	100

2/3 WAY FINNED BONNET PNEUMATIC CONTROL VALVES WITH ELECTRIC ACTUATOR

BILL OF MATERIAL

Item	Parts	Material
1	Body	SS ASTM A351CF8/CF8M
		CS ASTM A216, Gr. WCB
		CI, SGI
2	Seat	SS AISI 420/ SS AISI 316
3	Gasket	Foil coated with Cr. Ni.Graphite
4	Plug	SS AISI 420/ SS AISI 316
5	Duro Bush	PTFE Lined & coated,
5	Duro Bush	SS as backed.
6	Bonnet	SS ASTM A351CF8/CF8M
		CS ASTM A216, Gr. WCB
		CI, SGI
7	Studs/ Nuts	IS 1363, ASTM A193, Gr.B7
7	Studs/ Nuts	IS 1363, ASTM A 194 Gr.2H
8	Gland Packing	Graphited PTFE
9	Gland Nut	SS AISI 304
10	Yoke Nut	CS ASTM A216, Gr. WCB
11	Actuator	Electric Actuator*

*Refer to actuator leaflet for details of components.


TECHNICAL DATA TABLE
Valve Size in mm			20	25	40	50	65	80	100	150
5516 Mixing	Port size	Upper ‘A’ Port	21	27	40	50	65	80	101	140
	Dim. in mm	Lower ‘B’ Port	25	27	40	50	60	75	95	140
	Kv M³/hr.		6.3	10	25	40	63	100	160	320
Travel			20	20	20	30	30	30	30	30
Travel			30	30	30	30	30	30	30	50
Electric Actuator			KN 02	KN 02	KN 02	KN 05	KN 05	KN 10	KN 10	KN 10
Electric Actuator			KN 05	KN 05	KN 05	KN 10	KN 10	KN 10	KN 25	KN 25

DIMENSIONS (IN MM)

Catalogue Number	Size	Electric Actuator	A	B	C	F x G or ØD	Wt.Kg. (Approx.)	Envelop Size L x H x W (Approx.)	Box Wt. Kg. (Approx.)
Catalogue Number	Inch	Electric Actuator	A	B	C	F x G or ØD	Wt.Kg. (Approx.)	Envelop Size L x H x W (Approx.)	Box Wt. Kg. (Approx.)
5516A205/WCBF x KN 02	3/4	KN 02	150	70	553	215 x 142	10.0	673 x 240 x 167	12.5*
5516A201/WCBF x KN 05	3/4	KN 05	150	70	580	Ø178	10.0	700 x 203 x 203	13.5*
5515A255/WCBF x KN 02	1	KN 02	160	75	608	215 x 142	12.5	733 x 240 x 167	14.5*
5516A251/WCBF x KN 05	1	KN 05	160	75	635	Ø178	12.5	760 x 203 x 203	16.0*
5516A405/WCBF x KN 02	1 ½	KN 02	200	90	621	215 x 142	19.0	761 x 240 x 167	23.0*
5516A401/WCBF x KN 05	1 ½	KN 05	200	90	650	Ø178	19.0	790 x 203 x 203	24.0*
5516A505/WCBF x KN 05	2	KN 05	230	100	730	Ø178	27.0	880 x 203 x 203	32.0*
5516A501/WCBF x KN 10	2	KN 10	230	100	835	Ø225	33.0	985 x 250 x 250	39.0*
5516A655/WCBF x KN 05	2 ½	KN 05	290	145	755	Ø178	36.0	950 x 203 x 203	43.0**
5516A651/WCBF x KN 10	2 ½	KN 10	290	145	855	Ø225	45.0	1050 x 250 x 250	54.0**
5516A805/WCBF x KN 05	3	KN 10	310	155	925	Ø225	56.0	1130 x 250 x 250	65.0**
5516A1005/WCBF x KN 10	4	KN 10	350	175	930	Ø225	75.0	1155 x 250 x 250	86.0**
5516A 1001/WCBF x KN 25	4	KN 25	350	175	1012	Ø260	89.0	1237 x 285 x 285	90.0**
5516A1505/WCBF x KN 10	6	KN 10	480	225	988	Ø225	103.0	1263 x 250 x 250	110.0**
5516A1501/WCBF x KN 25	6	KN 25	480	225	1070	Ø260	107.0	1345 x 285 x 285	120.0**

Note:

* Weight of cardboard + PUF Box Packing. Which may change for Export when packed in wooden box.** Weight of Wooden Box Packing.

Note:

Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.

Home > Control Valves > Motorised Control Valves > 5516A-CSF