Home

About Us

Products Newsletter Offshore Capabilities Downloads Contact Us
    Products l Back  
    2/2-Way Pneumatic Piston Operated Valve with Engineering Plastic-Piston Actuator
For On-Off Application, 5812M For Flow Above Seat (Normally Closed),
5822M For Flow Above Seat (Normally Open).

DATA SHEET
PV-5812M-NC
PV-5822M-NO
   
SPECIFICATIONS :
Sizes 15mm (½”) to 150mm (6”).
 
CONSTRUCTION :
Body Cast Iron : IS 210 Gr. FG 200 SG Iron-ASTM A536,
Gr.60-40-18 (DIN 0.7043)(GGG40.3).
Cast Steel: ASTM A 216 Gr. WCB St.St.: ASTM A 351CF8
(SS304), or ASTM A351CF8M (SS316).
Pressure Temp. Rating As per ANSI B 16.5 Class 150.
End Connections Flanged as per ANSI B 16.5 Class 150.
Trim                                 St. St. AISI 420/304/316 Ground and hard chrome plated.
Stem Packing Self adjusting, Spring loaded, Teflon Packing.
Plug and Seat St. St.: AISI 420/304/316.
Seating Soft seated Teflon backed by EPDM. Optional-VITON/ EPDM, Buna Nitrile.
Leakage Soft Seated Class VI, as per ANSI B 16.104-1976.
Characteristics On-Off, normally close/open.
Working Fluid Pressure Refer to table below.
Working Temperature On steam-continuous :155°C, Intermittent 180°C,
EPDM 135°C, VITON 180°C.
 
ACTUATOR :
Spring Return type Engineering Plastic Pneumatic Actuator. (Except size 150 mm)
Cylinder cover & piston Glass filled polyamide.
Piston Packing Buna Nitrile.
Actuator Spring IS 4454 Grade III, duly painted.
Act. Wkg. Pres.
(Signal Pr.)
3.5 to 6 bar (refer to graph)
Operating cycles Upto 50 mm 300 cy/hr., (tested on air, on other fluids this figure may vary). For other size details, refer to AVCON.

Life expectancy Over one million cycles (lab tested in ideal condition.)
Air Quality Lubricated filtered and free of moisture. Shop air or dry instrument quality air.
Max. Operating
Pressure differential
Refer to graph.
Accessories Air lock, position indicating limit switch box, solenoid valve, filter regulator gauge.
Other accessories available on application.
Application For control of air, water, gas, steam in textile, power generator, paper & pulp, chemical,
petrochemical industries, PSA nitrogen system, air dryers, gas generators & others.
Back Pressure Suitable upto 2.5 bar.
Instruction manual Refer to IM 5812M/5822M.
 
SPECIFICATION TABLE
TYPE 5812M, FOR NORMALLY CLOSED VALVE, FLOW ABOVE SEAT
Catalogue
Number
  Size   Orifice
Size
Flow Factor
Kv
Maximum Pressure in Bar Actuator Model Air
Consumption
Weight
mm mm M³/hr. Oil/Water/Air     Steam     No. Lit/Cys. Kgs.
5812M155 15 15 4 16 10 K-61 0.06 3.1
5812M205 20 20 7 16 10 K-61 0.06 3.73
5812M255 25 25 10.5 16 10 K-81 0.25 6.43
5812M305 30 UNDER DEVELOPMENT
5812M405 40 38 31 12 10 K-101 0.64 11.38
5812M505 50 50 42 10 8 K-101 0.64 15.67
5812M655 65 65 66.5 6 5 K-121 0.92 18.5
5812M805 80 75 95 5 4 K-121 0.92 22.5
5812M1005 100 102 169 3.5 3 K-121 0.92 28.5
*5812M1505 150 150 335 2 2 K-121 0.92 47.0
SPECIFICATION TABLE TYPE 5822M, FOR NORMALLY OPEN VALVE, FLOW ABOVE SEAT
5822M155 15 15 4 16 10 K-61 0.06 3.0
5822M205 20 20 7 16 10 K-61 0.06 3.74
5822M255 25 25 10.5 16 10 K-81 0.25 6.17
5822M305 30 UNDER DEVELOPMENT
5822M405 40 38 31 8 7 K-101 0.64 10.27
5822M505 50 50 42 6 5 K-101 0.64 14.27
5822M655 65 65 66.5 6 5 K-121 0.92 18.0
5822M805 80 75 95 5 4 K-121 0.92 22.5
5822M1005 100 102 169 3.5 3.5 K-121 0.92 29.5
*5822M1505 150 150 335 2 2 K-121. 0.92 48.00
 Note : 5812 & 5822 can not be interchanged & are to be ordered out separately.                * Using Double Acting Actuator, Min Actuator Pressure 4 bar.
 
1
 
 DIMENSIONS ( IN MM )
Catalogue
Number
Size Actuator   A   B   C   D E
Inch mm
58XXM155 ½ 15 K-61 130 44.5 220 52 80
58XXM205 3/4 20 K-61 150 49 220 52 80
58XXM255 1 25 K-81 160 54 265 60.5 100
58XXM405 1 ½ 40 K-101 200 75 295 73 120
58XXM505 2 50 K-101 230 76 342 73 120
58XXM655 2 ½ 65 K-121 290 89 454 87 161
58XXM805 3 75 K-121 310 95.5 460 87 161
58XXM1005 4 100 K-121 350 114.5 485 87 161
58XXM1505 6 150 K-121 480 142 570 87 161
Combined dimensional table for 5812M and 5822M.
 
Note:
Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.
   

Products l Back
   
  home l about us l products l newsletter l offshore capabilities l downloads l sitemap l faq l contact us Copyright © 2008 All Rights Reserved