Home > Pneumatic On/Off Valves > Pneumatic Diaphragm Valves > 7412B  
  2/2-Way Pneumatic Diaphragm Operated Normally Closed Valves
Screwed Female End Type Body For High Duty, On-Off Application
DATA SHEET
7412 B
   
SPECIFICATION :
Size 15 mm (½”) to 50 mm (2")
 
CONSTRUCTION :
Body and End Piece Investment Casted ASTM-A, 351CF8 (St.St. 304)/CF8M
(St.St. 316)
Pressure Temperature Rating
As per ANSI class 300.
End Connections Standard BSP(F)/NPT(F) or Socket Weld.
Seating Metal to Metal backed by specially compounded Teflon.
Leakage As per ANSI B16.104 - 1976
Trim (Spindle) S.S. AISI 400/S.S. hard chrome plated.
Stem Packing Self adjusting, spring loaded Teflon packing.
Characteristics On-off, normally closed.
Working Fluid Pressure Refer to table below.
Working Temperature On steam - continuous 180°C
Intermittent 205°C.
 
ACTUATOR
Spring return type, high duty Pneumatic Diaphragm Actuator.
Diaphragm Cover Sheet metal pressing.
Diaphragm Nylon inserted Neoprene.
Bottom Cover High duty cast iron.
Yoke ASTM. A216 WCB Investment casted.
Actuator Spring IS 4454 Grade III, duly painted.
Actuator Working 2 to 3.5 bar.
Signal Pressure (Main line pressure dependent).
Operating Cycles per hour 15mm, 20mm, 25mm upto 800 cy/hr. 35 mm and 50mm upto 300 cy/hr (tested on air, on other fluids, this figure may vary).
Life Expectancy Over one million cycles (lab tested in ideal condition).
Air Quality Dry air or non corrosive gas.
Accessory Air lock, Solenoid Valve, Filter Regulator Gauge. Other accessories available on application.
Application For control of air, water, oil, gas, steam, hydraulic oil specially where heavy duty operations are
called for, specially on tyre and tube building presses, power generation, atomic energy,
chemical & petrochemical plant, PSA nitrogen system, air and gas dryers, gas generators and
others.
Back Pressure Refer to AVCON.
Instruction Manual Refer to 1M 7412B.
 
SPECIFICATION TABLE
Catalogue
Number

Size
BSP(F)

Orifice
Size
Flow Factor
Kv
Maximum Working Pressure Safe Working
Pressure
Actuator
Type
Air
Consumption
Air/Gas Hot Water Steam
Inch mm mm M³ /hr. Bar Bar Bar bar Litres/cy
7412B15 ½ 15 13 2.8 21 16 16 42 450A 0.150
7412B20 3/4 20 15 4.3 21 16 16 42 550A 0176
7412B25 1 25 19 7.0 21 16 16 42 550C 0.471
7412B35 1 ½ 35 34 22.7 21 16 16 42 550D 0.966
7412B50 2 50 45 36.0 21 16 16 42 550D 0.966
 
1
 
OPERATION :
Valve Type 7412B - In normal condition passage between ‘A’ and ‘AB’ port is closed. On introduction of air in the actuator ‘A’ port is connected to ‘AB’ port is connected to ‘A’.
DIMENSIONS (IN MM)
Catalogue
Number
Size A B C ØD Weight Kgs
Inch mm
7412B1 5 ½ 15 85 50 166 165 2.750
7412B20 3/4 20 110 66 200 184 6.350
7412B25 1 25 120 72 250 241 10.750
7412B35 1 ½ 35 150 91 310 300 18.000
7412B50 2 50 190 100 432 300 24.500
•OPEN TOLERANCE ± 3MM ALL OVER.
 
FLOW DIAGRAMS
 
Note:
Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.
   
 
Home > Pneumatic On/Off Valves > Pneumatic Diaphragm Valves > 7412B
 
 
 
   
About Us | Industries We Serve | Distribution Network | Quality | Downloads | Contact Us
Copyright Avcon Controls Pvt. Ltd, 2011-2012. All Rights Reserved.