| |
|
Products l Back |
|
| |
|
2/2- Way Pilot Operated, Diaphragm Type Solenoid Valves.
For steam and hot water application upto 9 bar pressure,
Normally Closed, Energised To Open
Normally Open, Energised To Close |
DATA SHEET
9131 E
9132 E |
|
| |
|
| SPECIFICATIONS : |
| Sizes |
10 mm (3/8") to 25 mm (1"). |
| End Connections |
Standard-BSP ('G' Threads). |
| Construction-Body |
Upto 25mm (1") Brass forged IS 6912. |
| Diaphragm |
Standard Glass filled PTFE (Teflon). |
| Pilot Seat |
PTFE. |
| Differential Pressure |
From 0.5 to 9 bar (See table). |
| Coil Voltage |
Standard-230-volts, 50Hz AC.
Optional-Any Standard AC range. |
| Coil Insulation and Temperature |
Ambient upto 42°C.
Class 'H' insulated upto 155°C.
Class 'C' insulated upto 180°C. |
Coil rating
|
Continuously rated. |
| Enclosure |
Standard-General Purpose SQ. moulded coil upto IP-20,
Optional- Weatherproof SQ. moulded coil upto IP-67,
Flameproof Round coil upto FLP IIB/ FLP IIC. |
| Approvals |
CMRI Dhanbad, CCE. |
| Fluids |
Steam temp. upto 150°C.
Hot water temp. upto 95°C. |
| Sales Point |
Diaphragm pilot operated, standard valve for medium pressure steam application. |
| Application |
Steaming equipment, textile, processing equipment, laundry equipment,ironing equipment, kitchen equipment, sterlizers, tanning plants, Tobacco plants and others. |
|
 |
| Note |
Not suitable for back pressure from outlet side. Hot water temperature limited up to 95°C only.
Not suitable for wet steam;
Available in Normally Open design.
Not available in DC construction.
For high pressure steam, Use valve type 9130H. For instruction manual refer General IMSV & General IM Coils.
USE OF FILTER IN THE INLET SIDE IS HIGHLY RECOMMENDED. |
|
|
|
| |
SPECIFICATION TABLE
2/2 WAY NORMALLY CLOSED
|
Catalogue
Number |
pipe
Size |
Orifice
Size |
Flow Factor
Kv |
Minimum
pressure |
Maximum Operating Pressure
(bar) |
BTP |
Material |
Constr.
Ref. |
VA
Rating |
Coil |
Housing |
| Bar |
| Inch |
mm |
M³/hr. |
bar |
Hot Water* |
Steam |
bar |
Body |
Seat |
AC |
Type |
| 9131E10 |
3/8 |
10 |
1.4 |
0.5 |
9 |
9 |
40 |
BR |
PTFE
|
107 |
18 |
M45-HT |
SQ |
| 9131E15 |
1/2 |
10 |
1.5 |
0.5 |
9 |
9 |
40 |
BR |
PTFE |
107 |
18 |
M45-HT |
SQ |
| 9131E20 |
3/4 |
18 |
2.25 |
0.5 |
9 |
9 |
40 |
BR |
PTFE |
107 |
18 |
M45-HT |
SQ |
| 9131E25 |
1 |
18 |
2.6 |
0.5 |
9 |
9 |
40 |
BR |
PTFE |
107 |
18 |
M45-HT |
SQ |
|
| |
2/2 WAY NORMALLY OPEN
|
 |
Catalogue
Number |
pipe
Size |
Orifice
Size |
Flow Factor
Kv |
Minimum
pressure |
Maximum Operating Pressure
(bar) |
BTP |
Material |
Constr.
Ref. |
VA
Rating |
Coil |
Housing |
| Bar |
| Inch |
mm |
M³/hr. |
bar |
Hot Water* |
Steam |
bar |
Body |
Seat |
AC |
Type |
| 9132E10 |
3/8 |
10 |
1.4 |
0.5 |
9 |
9 |
40 |
BR |
PTFE
|
107 |
18 |
M45-HT |
SQ |
| 9132E15 |
1/2 |
10 |
1.5 |
0.5 |
9 |
9 |
40 |
BR |
PTFE |
107 |
18 |
M45-HT |
SQ |
| 9132E20 |
3/4 |
18 |
2.25 |
0.5 |
9 |
9 |
40 |
BR |
PTFE |
107 |
18 |
M45-HT |
SQ |
| 9132E25 |
1 |
18 |
2.6 |
0.5 |
9 |
9 |
40 |
BR |
PTFE |
107 |
18 |
M45-HT |
SQ |
|
| * Hot water at 95°C only. |
| |
| ELECTRICAL REFERENCE |
| Coil Type |
Power Consumption & Watt Rating |
Class Of
Insulation |
Protection |
| AC |
| VA Inrush |
VA Holding |
| M 45 HT SQ |
20 |
18 |
H |
C |
GP/WP IP-67 |
| M 45 HT RD |
20 |
18 |
H |
C |
GP/WP IP-67 |
M 45 HT
FLP IIB / FLP IIC |
20 |
18 |
H |
C |
IS 2148 Group IIA, IIB, IIC
IS 13947 Part I IP-67
IS 4012 Dustproof/ IS 4013 Dustlight |
|
|
| DIMENSIONS ( IN MM ) |
| Catalogue
Number |
Pipe
Size |
Constr.
Ref. |
A |
B |
C |
D |
Weight
(Approx.) |
Normally
Closed |
Normally
Open |
Inch |
Kgs.* |
| 9131E10 |
9131E10 |
3/8 |
107 |
48 |
15 |
91 |
48.5 |
0.723 |
| 9131E15 |
9131E15 |
1/2 |
107 |
48 |
15 |
91 |
48.5 |
0.673 |
| 9131E20 |
9131E20 |
3/4 |
107 |
65 |
16.5 |
99 |
51 |
0.903 |
| 9131E25 |
9131E25 |
1 |
107 |
68 |
18.5 |
99 |
51 |
0.953 |
|
| |
| TABLE FOR SATURATED STEAM UNDER ABSOLUTE PRESSURE |
Outlet Pres.
bar
(abs) |
Temp.
(°C) |
Sp.Volume
m³/kg. |
|
Outlet Pres.
bar (abs) |
Temp.
(°C) |
Sp.Volume
m³/kg. |
| 0.5 |
80.9 |
3.30 |
8.0 |
169.6 |
0.25 |
| 1.0 |
99.1 |
1.73 |
8.5 |
172.1 |
0.23 |
| 1.5 |
110.8 |
1.18 |
9.0 |
174.5 |
0.22 |
| 2.0 |
119.6 |
0.90 |
9.5 |
176.8 |
0.21 |
| 2.5 |
126.8 |
0.73 |
10.0 |
179.0 |
0.20 |
| 3.0 |
132.9 |
0.62 |
11.0 |
183.2 |
0.181 |
| 3.5 |
138.2 |
0.53 |
12.0 |
187.1 |
0.176 |
| 4.0 |
142.9 |
0.47 |
13.0 |
190.7 |
0.155 |
| 4.5 |
147.2 |
0.42 |
14.0 |
194.1 |
0.144 |
| 5.0 |
151.1 |
0.38 |
15.0 |
197.4 |
0.135 |
| 5.5 |
154.7 |
0.35 |
16.0 |
200.4 |
0.126 |
| 6.0 |
158.1 |
0.32 |
17.0 |
203.4 |
0.119 |
| 6.5 |
161.2 |
0.30 |
18.0 |
206.2 |
0.113 |
| 7.0 |
164.2 |
0.28 |
19.0 |
208.8 |
0.107 |
| 7.5 |
167.0 |
0.26 |
20.0 |
211.4 |
0.102 |
|
| APPROVAL & CERTIFICATIONS : |
| CMRI DHANBAD |
For Flame/ Explosion proof Enclosure
For Group IIB & IIC. |
| CCE-NAGPUR |
For Flame/ Explosion proof Enclosure
For Group IIB. |
| DGFASLI-MUMBAI |
For Flame/ Explosion proof Enclosure
For Group IIB. |
| BIS LICENCE |
For ISI MARK-for Flame/ Explosion proof Enclosure
For Group IIB. |
| GOST CERTIFICATE |
Basic Eligibility as an Exporter to Russia. |
GOSGORTECHNADZOR
CERTIFICATE |
Product approval Hazardous Areas-Russia. |
| HYGENIC CERTIFICATE |
Approval to supply products for Use in Food Beverages Industries. |
| |
| INSTALLATIONS : |
(1) Use good quality pipe line strainer before solenoid valve; Use of NON RETURN VALVE after valve is recommended.
(2)Valve can be mounted in any position, but keeping solenoid upright & vertical.
(3)Not advisable for DC Voltage. |
|
|
|
|
| |
| * Weight with SQ enclosure only, ask AVCON for other weights. |
| Note: |
Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON. |
| |
|
|
|
|
|
