AvconIndia

Home > Control Valves > Pneumatic Control Valves > 5116A-B

3-Way Pneumatic Control Valves with Multispring Actuator for Mixing & Diverting Application-
Available in ‘A’ Port Closed or ‘B’ Port Closed
(Normally Supplied in ‘A’ Port Closed Position)
Field Reversible from ‘A’ Port Closed to ‘B’ Port Closed Design

DATA SHEET
PV-5116A/B

SPECIFICATIONS :
Size	20 mm (3/4”) to 100 mm (4”).
Unified Flanges	As per ANSI CI. 150 and PN 16.
Pressure Rating	As per ANSI CI. 150,CI. 300, PN 16 & PN 25.
Pressure Temp. Rating.	As per ASTM-A-16.34.
Gland Packing	Carbon filled Teflon for temp upto 220OC.
Design Standard	ASME B16.34
Leakage	As per ASME 16.104 CI.IV (0.01% of Kv) for 5116A Series and Class VI Bubble tight for 5116B Series.
Face to Face	As per DIN-3202.
Testing Standard	As per ISA S 7501.
Type of Plug	On-Off or Linear.
Seat	Screwed type replaceable
Body Material	CI-ASTM126 CI.B (DIN 0.06025 GG25). SG Iron-ASTM A536, Gr.60-40-18 (DIN 0.7043) (GGG40.3). CS-ASTM A216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M(DIN1.4410) SS-ASTM A351CF8(DIN1.4301)
Plug Material	SS AISI 420/316.
Seat Ring	SS AISI 420/316.
Spindle	410/316 Ground, Burnished and Hard Chromed.
Studs	ASTM A193 Gr. B7.
Hex. Nuts	ASTM A194 Gr. 2H.
Body Packing	Cr. Ni Foil coated with graphite.
Rangeability	Linear 50:1.
Fluid	Air, Water, Steam, Gas, etc.
Note	5116A are Metal Seated Valves And 5116B are Soft Seated Valves.

ACTUATOR
Pneumatic diaphragm type Multi Spring Reversible.
Pressure chambers	Steel pressing to IS 513CRCD.
Diaphragms	Nylon inserted high Nitrile, rollform type.
Temperature	-20OC to +80 OC
Springs	EN 47 - Cr. V. Steel.
Max. Pres. Over diaphragm	Upto 4.5 bar
Yoke	Cast carbon steel castings one piece.
Spindle	Guided through Teflon bearing, leakage prevented by Synthetic seal, protected by rubber bellow.

SPECIFICATION TABLE FOR TYPE 5116A/B- NORMALLY ‘A’ PORT CLOSED,
ALTERNATIVELY ‘B’ PORT CLOSED

Pressure Table
Actuator Number	Spring Range	Control Pressure	Sizes (MM)
	Bar	Bar	20	25	40	50	65	80	100
			Port sizes (mm)
			21/25	27/27	40/40	50/50	65/60	80/75	101/101
MSD -250	A - 0.2 - 1.0	1.2	3.2	2.6	0.3	-	-	-	-
	B - 0.4 - 1.2@	1.6	12.6	10.6	3.8	2.1	-	-	-
	C - 0.8 - 2.4@	2.7	31.3	26.8	11.0	6.8	-	-	-
	D - 1.5 - 2.5@	4.0	40.0	40.0	23.5	19.7	-	-	-
MSD-400	A - 0.2 - 1.0	1.2	8.7	7.3	2.4	1.2	-	-	-
	B - 0.4 - 1.2@	1.4	23.7	20.2	8.1	4.9	2.5	1.4	-
	C - 0.8 - 2.4@	2.7	40.0	40.0	19.4	12.3	6.9	4.3	2.6
	D - 1.5 - 3.0@	4.5	-	-	-	-	14.8	9.5	5.9
MSD-800	A- 0.2 - 1.0	1.2	-	-	-	-	2.5	1.4	0.7
	B - 0.4 - 1.2@	1.4	-	-	-	-	7.0	4.4	2.6
	C - 0.8 - 2.4@	2.7	-	-	-	-	15.9	10.3	6.5
	D - 1.5 - 3.0@	4.5	-	-	-	-	40.0	29.6	19.0

Note :
(1) @VP(PTP),EVP(ETP)Plus FRG needed to be installed on the valve.
(2) 5116A/B Valve sizes upto 40mm can be used for Diverting application, for size above 50mm Use 5119A/B Valves.

3/2 WAY PNEUMATIC CONTROL VALVES WITH MULTI SPRING ACTUATOR (16).

BILL OF MATERIAL

Item	Parts	Material
1	Body	SS ASTM A351 CF8/CF8M
		CS ASTM A 216, Gr. WCB
		CI, SGI
2	Seat	SS AISI 420/ SS AISI 316
3	Gasket	Foil coated with Cr. Ni.Graphite
4	Plug	SS AISI 420/ SS AISI 316
5	Duro Bush	PTFE Lined & coated,
5	Duro Bush	SS as backed.
6	Bonnet	SS ASTM A351 CF8/CF8M
		CS ASTM A216, Gr. WCB
		CI, SGI
7	Studs/ Nuts	IS 1363, ASTM A193, Gr.B7
7	Studs/ Nuts	IS 1363, ASTM A 194, Gr.2H
8	Gland Packing	Graphited PTFE
9	Gland Nut	SS AISI 304
10	Yoke Nut	CS ASTM A216, Gr. WCB
11	Actuator	Multi Spring* Pneumatic
11	Actuator	Diaphragm.

* Refer to actuator leaflet for details of components.

TECHNICAL DATA

Valve size in MM			20	25	40	50	65	80	100
5116 Mixing	Port size Dim. in mm	Upper ‘A’ Port	21	27	40	50	65	80	101
		Lower ‘B’ Port	25	27	40	50	60	75	101
Kv. M3/hr.			6.3	10	25	40	63	100	160
Travel			20	20	20	30	30	30	30
					30
Actuator MSD			250	250	250	400	400	800	800
					400

DIMENSIONS (IN MM)

Catalogue Number	Size	Pneumatic Actuator	A	B	C	ØD	W	Wt.Kg. (Approx.)	Envelop Size LxHxW (Approx.)	Box Wt. Kg. (Approx.)
Catalogue Number	Inch	Pneumatic Actuator	A	B	C	ØD	W	Wt.Kg. (Approx.)	Envelop Size LxHxW (Approx.)	Box Wt. Kg. (Approx.)
5116A/B 205	3/4	250	150	70	390	250	250	14.0	490x275x275	17.5*
5116A/B255	1	250	160	75	421	250	250	16.0	530x275x275	21.5*
5116A/B355	1 ½	250	200	90	434	250	250	22.0	560x275x275	27.0*
5116A/B365	1 ½	400	200	90	476	350	350	28.0	600x380x380	34.0*
5116A/B505	2	400	230	100	485	350	350	32.0	625x380x380	45.0*
5116A/B655	2 ½	400	290	120	505	350	350	40.5	665x380x380	55.0**
5116A/B805	3	800	310	130	695	405	405	85.0	865x450x450	105.0**
5116A/B1005	4	800	350	150	702	405	405	96.0	895x450x450	116.0**

Note:
*Weight of cardboard + PUF Box Packing, Which may change for Export when packed in wooden box.
**Weight of Wooden Box Packing.

Note:

Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.

Home > Control Valves > Pneumatic Control Valves > 5116A-B