AvconIndia

Home > Control Valves > Pneumatic Control Valves > 5116A/CSF

3-Way Pneumatic Control Valves with Multispring Actuator for Mixing Duty -Thermic Fluid Application
Available In ‘A’ port Closed or ‘B’ Port Closed Configuration
(Normally Supplied In ‘A’ Port Closed Position)
(Field Reversible From ‘A’ Port Closed To ‘B’ Port Closed Design)

DATA SHEET
PV-5116A/CSF

SPECIFICATIONS :
Size	20 mm (3/4”) to 100 mm (4”).
Unified Flanges	As per ANSI CI. 150 and PN 16.
Pressure Rating	As per ANSI CI. 150,CI. 300, PN 16 & PN 25.
Gland Packing	Glass filled Graphited Teflon for 420OC with Cooling Finned Bonnet.
Design Standard	ASME B16.34
Leakage	As per ASME 16.104 CI.IV(0.01% of Kv)
Face to Face	As per DIN-3202.
Testing Standard	As per ISA S 7501.
Type of Plug	On-Off or Linear.
Seat	Screwed type replaceable.
Body & Bonnet Material	CS-ASTM A216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M (DIN1.4410) (G-X10 Cr.Ni MO189) SS-ASTM A351CF8 (DIN1.4301)
Plug Material	SS AISI 420/316.
Seat Ring	SS AISI 420/316.
Spindle	410/316 Ground, Burnished And Hard Chromed.
Studs	ASTM A193 Gr. B7.
Hex. Nuts	ASTM A194 Gr. 2H.
Body Packing	Cr. Ni Foil coated with graphite.
Rangeability	Linear 50:1
Fluid	Hot Thermic Fluid, Hot Water, Hot Steam, etc.
Note	5116A are Metal Seated Valves.

ACTUATOR :
Pneumatic diaphragm type Multi Spring Reversible.
Pressure chambers	Steel pressing to IS 513CRCD.
Diaphragms	Nylon inserted high Nitrile, rollform type.
Temperature	-20°C to + 80°C
Springs	EN 47 - Cr. V. Steel.
Max. Pres. Over diaphragm	Upto 4.5 bar.
Yoke	Cast carbon steel castings one piece.
Spindle	Guided through Teflon bearing, leakage prevented by Synthetic seal, protected by rubber bellow.

SPECIFICATION TABLE FOR TYPE 5116A NORMALLY ‘A’ PORT CLOSED ALTERNATIVELY ‘B’ PORT CLOSED

Pressure Table
Actuator Number	Spring Range	Control Pressure	Sizes (mm)
			20	25	40	50	65	80	100
			Port sizes (mm)
	Bar	Bar	21/25	27/27	40/40	50/50	65/60	80/75	101/101
MSD -250	A- 0.2-1.0	1.2	3.2	2.6	0.3	---	---	---	---
	B - 0.4 - 1.2@	1.6	12.6	10.6	3.8	2.1	0.8	0.3	---
	C - 0.8 - 2.4@	2.7	31.3	26.8	11.0	6.8	---	---	---
	D - 1.5 - 2.5@	4.0	40.0	40.0	23.5	19.7	---	---	---
MSD-400	A-0.2-1.0	1.2	8.7	7.3	2.4	1.2	---	---	---
	B - 0.4 - 1.2@	1.4	23.7	20.2	8.1	4.9	2.5	1.4	---
	C - 0.8 - 2.4@	2.7	40.0	40.0	19.4	12.3	6.9	4.3	2.6
	D - 1.5 - 3.0@	4.5	---	---	---	---	14.8	9.5	5.9
MSD-800	A-0.2-1.0	1.2	---	---	---	---	2.5	1.4	0.7
	B - 0.4 - 1.2@	1.4	---	---	---	---	7.0	4.4	2.6
	C - 0.8 - 2.4@	2.7	---	---	---	---	15.9	10.3	6.5
	D - 1.5 - 3.0@	4.5	---	---	---	---	40.0	29.6	19.0

Note:
(1) @VP(PTP), EVP(ETP) Plus FRG needed to be installed on the Valve.
(2) For Hot Thermic Fluid application, maximum working pressure limit is upto 10 bar only.
(3) 5116A/CSF Valve sizes upto 40 MM can be used for Diverting application. For sizes 50 MM and above use 5119A/CSF.

3/2 WAY FINNED BONNET (CSF) PNEUMATIC CONTROL VALVES WITH MULTI SPRING ACTUATOR (16)

BILL OF MATERIAL

Item	Parts	Material
1	Body	SS ASTM A351CF8/CF8M
		CS ASTM A216, Gr. WCB
		SGI
2	Seat	SS AISI 420/ SS AISI 316
3	Gasket	Foil coated with Cr. Ni.Graphite
4	Plug	SS AISI 420/ SS AISI 316
5	Duro Bush	PTFE Lined & coated,
5	Duro Bush	SS as backed.
6	Bonnet	SS ASTM A351CF8/CF8M
		CS ASTM A216, Gr. WCB
		SGI
7	Studs/ Nuts	IS 1363, ASTM A193, Gr.B7
7	Studs/ Nuts	IS 1363, ASTM A 194, Gr.2H
8	Gland Packing	Graphited PTFE
9	Gland Nut	SS AISI 304
10	Yoke Nut	CS ASTM A216, Gr. WCB
11	Actuator	Multi Spring* Pneumatic
11	Actuator	Diaphragm.

* Refer to actuator leaflet for details of components

TECHNICAL DATA TABLE

Valve size in mm			20	25	40	50	65	80	100
5116 Mixing	Port size Dim. in mm	Upper ‘A’ Port	21	27	40	50	65	80	101
		Lower ‘B’ Port	25	27	40	50	60	75	101
	Kv. M3/hr.		6.3	10	25	40	63	100	160
Travel			20	20	20	30	30	30	30
					30
Actuator MSD			250	250	250	400	400	800	800
					400

DIMENSIONS (IN MM)

Catalogue Number	Size	Pneumatic Actuator	A	B	C	ØD	W	Wt.Kg. (Approx.)	Envelop Size L X H X W (Approx.)	Box Wt. Kg. (Approx.)
Catalogue Number	Inch	Pneumatic Actuator	A	B	C	ØD	W	Wt.Kg. (Approx.)	Envelop Size L X H X W (Approx.)	Box Wt. Kg. (Approx.)
5116A 205/CSF	3/4	250	150	70	445	250	250	14.5	540 x 275 x 275	18.0*
5116A255/CSF	1	250	160	75	500	250	250	16.5	600 x 275 x 275	22.5*
5116A355/CSF	1 ½	250	200	90	514	250	250	23.0	634 x 275 x 275	28.0*
5116A365/CSF	1 ½	400	200	90	600	350	350	30.0	725 x 380 x 380	38.0*
5116A505/CSF	2	400	230	100	615	350	350	35.0	750 x 380 x 380	46.0*
5116A655/CSF	2½	400	290	120	635	350	350	44.0	795 x 380 x 380	58.5*
5116A805/CSF	3	800	310	130	865	405	405	89.0	1035x450x450	105.0**
5116A1005/CSF	4	800	350	150	872	405	405	101.0	1065 x450x450	112.0**

Note:
* Weight of cardboard + PUF Box Packing which may change for Export when packed in wooden box.
** Weight of Wooden Box Packing.

Note:

Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.

Home > Control Valves > Pneumatic Control Valves > 5116A/CSF